Assistive Touch: How to display the Home button on the iPhone screen?

Causes of malfunction

In fact, there may be several reasons why the Home button on the iPhone 5S does not work. And they fall into three categories:

Mechanical.
Software.
Technological.

Let's see what can be attributed to mechanical faults that lead to the Home button on the iPhone 5S not working . This category of malfunctions can be caused by dust or moisture getting under the button itself or mechanical damage to it due to impact or excessive pressure. Most often, such issues are resolved with the help of a service center.

Calibrating the Home Button

Some users of the expensive gadget have noticed that when the Home button on the iPhone 5S does not work well, calibrating it helps. How to do it? Let's figure it out.

To carry out this procedure, you need to display any application on the iPhone screen, and then, holding down the Power button, wait for the “Turn off” slider to appear. After that, press and hold the “Home” button. After ten seconds the application will close. After this, the system will calibrate the button. This will eliminate the software failure associated with the system.

What causes breakdown

There are a total of five buttons on the iPhone body, two of which are volume control, one is for returning to the main screen. Another one is for controlling call modes and, finally, the remaining one is for performing the functions of locking the touch screen and turning on the device.

Another interesting article for you: How to check memory on an iPhone: methods

There are many reasons why the lock button does not work:

The Power button is physically damaged (broken).
The cable connected to the board does not work (broken or incomplete contact).
The main board of the smartphone gets wet, which means the contacts lose conductivity.
Reasons related to incorrect operation and errors in the operating system.
Often breakage occurs due to too much pressure. You can continue to use the iPhone, but this will significantly reduce the comfort of work.

Chemical solution to the problem

Quite often, the reason why the Home button on the iPhone 5S stops working is because it is dirty. How to unlock a Lenovo tablet if the data does not charge the Lenovo phone. This happens if the phone is taken with greasy hands or spilled drinks fall on it, flowing under the case. For those who have never made backup copies, how to create an iPhone 5. A fairly effective way in this case is to use WD-40 aerosol or isopropyl alcohol, which is included in many windshield wipers. It is important to remember that the chemical must be applied to the button, and not to the screen. Mistakes can lead to additional problems. After this application, you must press the button repeatedly and allow the liquid to get under it. Is the power button on your iPhone broken? We put the iPhone into iPhone 5s mode, touch id does not work. The cleaner will then remove grease stains or drink residues and the button will function as before.

Replacing the entire button with loss of Touch ID functionality

If on iPhone models with a physical button it is possible to replace a damaged module, albeit with loss of functionality of the fingerprint scanner, then on iPhone 7/8 models such repair is impossible.

The button is touch sensitive and when installing a non-native component, it is simply not recognized by the device. Both Touch ID and the Home button itself will not work

The ubiquitous Chinese have found a solution to the problem. This thing from AliExpress can help in such a situation.

Our reader has already tested a similar solution and is very pleased with it.

At first glance, this is a Chinese button, which is installed instead of the original one on older iPhones with a physical key.

This button is also physical (has a pressable movable button), but with a built-in Bluetooth module. How do you like this?

The key is connected to replace the original one, and after installation it connects to the smartphone via Bluetooth. So, pressing the button is perceived by the system as pressing the Home button and allows you to go to the main screen, launch the ambiguity panel and take screenshots.

How to repair: buttons like JC home are already offered to be installed in many unofficial service centers. You can order such a device on ALiExpress and simply find a smart technician to replace it, or pay 1500-2000 rubles. in the service.

Software method for solving the problem

If the above methods did not lead to the desired result, and the question of why the Home button on the iPhone 5S does not work remains open, you can use a software method to solve this issue. This is a temporary measure that will help you use your smartphone. How to connect a computer to a TV, connection requirements, what problems arise if the sound does not work, different screen resolutions, connection process, screen duplication. The option cannot be called convenient, but it is better than a completely non-functional button. How to do this?

It is necessary to display the image of the “Home” button on the smartphone screen. To do this, you need to go to your iPhone settings. In the settings, select the “Basic” tab. Your mobile phone is locked and you don’t know how to unlock the phone if you forgot your PIN code. Then, as described earlier, we go to the “Universal Access” category. Next, go to the AssistiveTouch category, after which four options for continuing the event appear on the screen, as shown in the figure above. We select the Home button. After this, there will be an application on the screen of your iPhone that simulates pressing this button. How to turn off an iPhone if the button does not work? Three. This will be the solution to your problem for a while. However, it is not perfect and may be a little annoying, but it will allow you to use the phone until you get to a service center.

Having become the proud owner of a gadget from Apple, you will have to understand not only the system, but also understand how to activate it. Startup is necessary for the device to start working. The process is easier than it sounds, and setup itself will take a few minutes. The user may be surprised by the number of lines and fields that must be completely filled out. In this article we will tell you what to enter and select in each of them. Follow the instructions below carefully, and if you do everything correctly, you shouldn't have any problems. We will look at all possible ways to activate a new iPhone.

How to disable the Home button from the screen?

If you need to remove the virtual Home button on your device, just use one of the following methods:

Go to “Settings”, go to “General” and find the “Accessibility” item. Here, click on Assistive Touch and turn it off;
Call your voice assistant Siri and dictate the phrase “Remove or turn off Assistive Touch.”

Why activation is needed

As mentioned above, to activate means to turn it on for the first time if you just took the device out of the box and removed the protective film. Or just turn it on, if the phone was previously reflashed or the settings were reset.

Activation is the initial setting of the gadget’s parameters, namely: language, region of residence, selecting a backup copy (if there is one: this is written below) and calibrating some additional functions and services. If you have already activated an iPhone, then some points should be familiar to you, otherwise, read our detailed article to the end.

Activation is also necessary for the device to identify your cellular operator and register it in the network database. After the owner inserts the SIM card and turns on the device, the iPhone sends information from the SIM, namely a unique IMSI (International Mobile Subscriber Identity) code. In a matter of seconds, all data is analyzed, all information is confirmed, and it is also checked whether the subscriber can access the requested network in which he is located.

Why is this necessary? The answer lies in the fact that in some countries devices are sold with an already linked cellular operator, that is, with a contract. Such devices are called “locked”. When trying to connect to the server, the owner is prohibited from using the smartphone with the current SIM card. If the device is “unlocked”, then a unique combination from the server will be sent to the phone, which is necessary for the Lockdown module to be activated. After this, access to the network becomes available to the user. Simply put, if the iPhone was purchased at a local hardware store or from trusted resellers, then the gadget can be used immediately, without additional searches for solutions on how to “unlock” the new device.

How are the two concepts “activation” and “Apple warranty” related?

Many users who pick up an Apple device for the first time are wondering what the warranty means when starting from scratch for the first time or again? The fact is that the activation process is accompanied by the automatic start of the warranty time from Apple. The warranty period does not begin on the day of purchase, but rather from the moment the Apple ID account was created (or re-authorized).

Important note! The initial text accompaniment “Hello” (Hello and other greetings in different languages) in no way signal that the device is new. This inscription appears regardless of whether the device is new straight out of the box or used with the content reset.

iPhone activation process

Before turning on your iPhone, make sure you have the correct size SIM card (micro for older models and nano for newer ones). Without a SIM, activation will not be possible. You will also need a wireless Internet connection (or cellular connection) or a computer with iTunes (as an option for restoring a backup). And only after you are convinced of all the steps listed above, you can safely hold down the Power button (or hold down the lower volume key and the lock button on iPhone 10 and higher).

There are no legal methods for activating a device without a SIM card! In versions of iOS 7 and higher/lower, such a vulnerability actually existed, but starting with iOS 7.1.2 it was fixed.

Activation on iPhone

To activate, you only need an iPhone, no other devices are needed. All you need to do is complete the following steps:

Insert the SIM card into the special tray . The slot is located on the side of the device, namely on the right side (on very old devices, starting with the first iPhones like 2G, 3G, 3GS, the slot is at the top). The hole can be opened using the tool that comes with the device itself on a piece of cardboard paper. If you don't have this device on hand, you can use a paperclip (do not open the tray with sharp objects, such as needles, as this may cause damage). Insert a paperclip or tool into the thin hole and remove the slot, then insert a SIM card of the appropriate size (remember, these are micro or nano sizes);
Launch the gadget . After you have inserted the SIM card, turn on your iPhone. To do this, you need to hold down the power button for a few seconds. When the signature apple icon appears, you can release the key. The welcome screen should appear. Press the Home button or pull up the shade on iPhone 10 and above models;
Calibrating Basic Settings . The welcome screen does not leave much choice of actions: you just need to select the language in which all information on the phone will be displayed (application names, notification texts, system texts, and so on). The next step is to select your region of residence;
Internet connection . It is best to use a wireless Wi-Fi connection - this will make the setup more stable. After selecting the region and language, the smartphone will check for available Internet networks. If there is one, you will have to enter a password. In another case, you can use the mobile Internet if it was previously connected to the SIM card. To do this, click on “Use cellular network”. Both LTE and 3G will work. Important note! You won’t be able to activate your iPhone if you use a gadget that distributes mobile Internet as a Wi-Fi connection;
Setting up services and authentication . Wait until synchronization finishes after the last step and proceed to the next settings. Some of them are optional and can be skipped by calibrating them later.

Set up Face >Activation via iTunes

How to Customize the Home Button on iPhone

Firmware for iPhone or iPad - instructions and list of current versions

The user can set convenient settings at any time. To prevent accidental clicks, it is recommended to use the easy access switch. The function is designed for people who are uncomfortable using smartphones with large displays.

Reachability mode allows you to control the gadget with one hand

This addition is recommended to be used only in extreme cases, and in normal cases it is advisable to remove it. Disabling the function will reduce the risk of accidental clicks and ensure correct operation of the phone.

How to reduce the pressing speed was described above. All manipulations with the “Home” button are carried out through the universal access settings. Here the menu contains various functions that you can explore and choose the most convenient for you.

Note! Multitasking a button allows you to assign it a triple click, which will perform a specific action. You can find out the list of available options through the main settings. Here you need to find the “Keyboard shortcut” item, which is in deactivated mode by default.

Suggested combinations:

shades of gray;
color inversion;
voice guidance of the interface;
screen enlargement;
virtual controller;
Assistive Touch.

Activation errors and how to solve them

If the activation process fails, check the following:

Problems with the modem or router. Perhaps the whole problem lies in the lack of Internet via a wireless network or the gadget is unplugged from the outlet. Check Wi-Fi functionality on other devices;
SIM integrity. Make sure that the SIM card has not been damaged (especially in cases where the card was cut with a special tool). Perhaps the contacts were erased due to the SIM being outdated. Check if it is installed correctly;
Long wait for an answer. The response from Apple servers may take some time (depending on the company's workload and data transfer speed). Don't worry if your phone can't get permission to use your current operator for a few minutes. You should sound the alarm if the wait takes more than an hour;
Reboot. Roll back your progress by entering your details again. Just hold down the “Power” button to turn it off, all entered information will be erased;
Alternative method. If you were unable to launch the gadget using the first method described, then try doing it through iTunes.

If for some reason the phone freezes and does not respond, then you should contact Apple service or a service center for diagnostics. But in general, the iPhone activation process is not complicated and you cannot confuse any items or buttons here. On most Apple devices, the procedure is the same, so after activating the device once, you can do it the next time without any instructions.

OUR SITE RECOMMENDS:

Its translation into English
15.12.20190
Russian-English online translator Free Russian-English translator and dictionary...
Battery capacity 4000 mAh is how many hours
15.12.20190
Contents1 Smartphone with a good battery2 Smartphone with a powerful...
Using the Cauchy criterion to investigate the convergence of the sequence
15.12.20190
Fundamental consistency. A sequence (>) is called fundamental if it...
FPS drops sharply during gameplay
15.12.20190
2. select “properties” 3. in the window that opens, look for...