If the apple logo is on the display and the iPad does not turn on

iPad won't turn on due to charging

If the iPad does not turn on, the problem may lie in the low battery level. A deep discharge often results in tablet computers not turning on at all or turning off within one or two minutes after starting. Therefore, the first thing you should do in this situation is to put the tablet on charge and leave it alone for several hours. During this time, the battery will charge, and you can try to turn on the iPad again - most likely, the new attempt will be successful.

Have you charged your iPad, but it turns out that it won’t turn on again? In this case, you need to check the functionality of the charger. It may not provide the required charging current, preventing normal charging of the battery. If you leave the iPad to charge for a long time, it will have absolutely no effect if the charger is broken. To check the functionality of the memory, use another tablet or iPhone . You can also try a different charger on your tablet or even try to recharge from the USB port of your computer.

If you are sure that just a few hours ago the battery was full, still put your tablet on charge - it is possible that in these few hours the battery has been completely discharged.

Making a reset

Desktop computers and laptops appeared much earlier than tablet computers. Experienced users who work a lot on computers know very well that if the equipment shows signs of a complete freeze and is not going to restore its functionality, you should press the “Reset” button. In the case of laptops that do not have this button, you need to press and hold the power button - after a while the laptop will turn off, after which it can be started and booted again.

What to do if the iPad won't turn on? You need to try to force the tablet to reboot. You must also ensure that all data in the internal memory remains intact. Since there is no “Reset” button on the iPad, we will proceed in a different way - hold down the power button and the Home button, hold them for 10 seconds and wait until the tablet reboots (a bitten apple should appear on the screen). As soon as the iPad restarts, its functionality will be restored.

Please note that this reboot method does not result in any loss of user data. But periodic backups never hurt anyone.

What to do if the iPad does not turn on and the apple is on fire

If, when you turn on your Apple device, you see that the apple logo is on, but the iPad does not turn on, do not despair. Below are a number of ways to find out what the problem is and maybe even fix it yourself.

Why the iPad won't turn on: the apple lights up and the screen goes blank

There are three groups of reasons why your iPad does not turn on and, perhaps, even the apple does not burn. These are the reasons:

1. The charging cable or adapter is faulty.
2. Software glitches.
3. Device components are faulty.

Let's move on to a more detailed consideration of the reasons why the iPad is frozen on the apple and does not turn on.

The apple light is on on the iPad and it won’t turn on - check the charge status

The reason seems banal, but sometimes they don’t think about the fact that the tablet is discharged. It often happens that the iPad does not turn on: the apple lights up and goes out after a split second. It is possible that the remaining battery charge allowed the device to turn on for a very short time.

Pay attention to the cable and charging adapter to see if they are damaged. Try charging another similar device with them or change the outlet. If after these manipulations the tablet starts charging, then the faulty accessory should be replaced or the socket repaired.

Please note that you should only use Apple certified equipment for charging.

Another option for resolving problems with turning on the tablet is to charge the battery for a very long time. It can last for 1-2 days. According to user reviews, this should help.

The apple is on fire and the iPad won’t turn on: software problems

You press the button on the iPad - the apple lights up, but then doesn’t turn on. This could be a sign that there is something wrong with your tablet's software. The first thing you should try is to restart the device. A deep reboot can be performed by long pressing the power and “Home” buttons. You must hold it until the apple logo appears. After a few seconds, your iPad is back to normal.

A universal way to fix a software error is to use device recovery mode. To update or restore the tablet's firmware, use iTunes.

The iPad won't turn on, but the apple is on fire: what to do?

If your tablet's display is dark but the Apple logo is lit, you should connect your tablet to iTunes. The version of iTunes must be the most up-to-date. Then connect the tablet to the computer.

The recovery process occurs as follows.

1. Turn off your iPad.
2. On your computer, open iTunes (latest version).
3. Connect the tablet to the computer with a cable.
4. Press and hold the “Home” button until the message “Connect to iTunes” appears on the tablet screen or it becomes clear that the program has found your device.

If, when connecting to a computer, the program displays any messages or warnings, follow the steps indicated on the screen to update or restore the iPad’s firmware. Steps through iTunes should help resolve the software error.

Please note that during recovery you may lose all data from your device. The problem can be resolved by creating a copy of the data.

If the tablet is not visible when connected to iTunes, then you should use DFU mode. Follow the strict time limits allocated for working in this mode.

If both recovery options cannot be implemented, you can use another computer with iTunes installed on it. Sometimes the reason that a device is not recognized through a computer is driver problems.

What to do if the iPad does not turn on and the apple is still burning?

Another group of reasons are faulty components of the device. The battery, power controller, cable between the display and the motherboard, or the battery charging port could have failed. All this can be replaced. If all the recommendations listed above do not solve the problem, contact a specialist for diagnostics. An electronics technician will help determine what is not working and replace the correct part of the device.

Source: https://www.gadgetparts.ru/defects/item/apple-ipad-universal/ipad_ne_vklyuchaetsya_gorit_yabloko/

iPad recovery

Do you have an iPad 2, iPad mini or any other type of tablet from Apple at your disposal? Your device won't turn on? It is possible that it has some kind of fatal software failure that prevents normal functionality. In some cases, even a reset does not help here. What to do?

You should try restoring your tablet computer - in this case it will return to the state in which it left the factory . In order to restore the operating system, you must perform the following steps:

• Turn off the tablet completely – its display should go dark;
• Connect your iPad to your computer and launch iTunes;
• Hold down the power button and the Home button on the iPad and wait 10 seconds;
• Continue holding the Home button for another 10 seconds.

After this, iTunes will notify that it has detected a device connected in recovery mode - then the program will begin to restore the iOS operating system by downloading the firmware. As soon as the procedure is completed, the iPad will reboot and turn on (if there are no other problems on board).

This method is very drastic, as it involves completely deleting data from the internal memory. Therefore, having a backup copy to restore them is mandatory.

Software error

It often happens that the iPad does not turn on, and the iTunes logo appears on the screen. Everything is simple here, there was a failure in the system. In fact, it is very difficult to achieve this, since iOS is one of the most secure and stable operating systems, but some neglect of the operating rules of iOS, such as rebooting the device during an update or “hacking” it, can lead to this kind of behavior of the gadget .

So, we have roughly figured out: if the iPad does not turn on, what to do? Regardless of the reason for the failure, one thing is for sure: there is no need to panic, everything can be restored on your own (this is where the closed and secure operating system from Cupertino will work). The state your tablet is in is called “recovery mode,” and all you need to do is connect your iPad to a computer with iTunes pre-installed. Please note that in order for your tablet to work with iTunes, you must use a certified cable, as uncertified cables may not be detected by the device. iTunes will automatically detect the problem and offer to reinstall the operating system, you just need to wait until this process completes itself, after which the iPad will restart and be ready to use. You can restore your data from a previously prepared copy and the iCloud cloud.

“Recovery mode” can be invoked manually if your iPad does not turn on and freezes during booting (infinite booting on the apple logo). To do this, you need to hold down the “power-unlock” button and the “Home” button until the image disappears from the screen. Afterwards, you need to press the “power-unlock” button and hold only the “Home” button, continue until the iTunes logo appears.

Moisture ingress

The iPad does not turn on - the apple lights up and then goes out. What to do in this situation? If the problem occurs after getting wet, you must urgently take the tablet to the nearest service center. Here it will be carefully disassembled, cleaned and dried, after which it will be checked for functionality. And you don’t need to listen to advice on cleaning it yourself - this will only harm your electronic assistant. This work should be done by specialists . They will also be able to cope with other tasks of restoring the functionality of Apple tablets.

Similar behavior of the iPad, when the apple lights up on the screen and then goes out, also appears with many other malfunctions. For example, when the battery life is exhausted.

iPad won't turn on or charge

What should I do if my iPad won't turn on or charge? Such situations do not arise very often, but it is easy to identify the reason for such behavior. The problem may be related to:

• If there is a general malfunction of the device, you will have to take it to the nearest service center;
• If the battery is faulty, this is another reason to visit the service center, since batteries are changed only here;
• If the charger or cable is faulty, check the integrity of these accessories and buy a replacement (if a fault is detected).

Thus, at home we can only perform the last operation - check the cable and charger .

iPad screen does not turn on, iPad works but the screen is black, what to do if the screen goes out – Mr.Profi

If the iPad screen does not turn on, then you need to find out which of the malfunctions (software or hardware) caused this. Problems with the equipment are immediately visible, so just bring your tablet to the Mr.Profi service center, where experienced engineers will fix it and give your device a second life.

Reasons why the iPad screen randomly turns off

These could be hardware or even software problems. First, you need to verify what caused the issue, as repairs will vary from case to case.

If the iPad has a black screen and does not turn on, then the possible reasons are as follows:

• Hardware problem. If the screen module was damaged due to the device being dropped, water getting inside, or due to cracks in the glass, then this is physical damage that contributed to the screen going dark altogether.
• The train has come off. If you drop this sensitive device from your hands, the cable connecting it to the motherboard may become slightly loose and this may prevent the touch screen from working. This failure is hidden, because there is no visible damage to the tablet.
• Software glitch. If you are absolutely sure that the screen on your iPad went dark due to an update and not due to mechanical damage, then you can fix it yourself by resetting the tablet to factory settings or deleting certain applications.
• Poor quality replacement. If after replacing the touchscreen on the iPad the screen does not turn on, then you need to contact the service center where the display module was repaired; perhaps the touch glass was installed of poor quality.

What to do if the iPad screen does not work

If your gadget is not charging and the Apple screen is blinking, a black, white or blue screen has appeared, or other malfunctions, then you need to pay attention to the symptoms.

So, there are some signs of a broken iPad screen that you need to pay attention to:

1. The tablet stops responding to touches, even when you press any buttons;
2. iPad does not turn on and the screen blinks;
3. The touch screen does not respond accurately;
4. Freezes (lags) occur;
5. The device does not respond to Apple Pencil touches.

No matter how trivial the following recommendations may sound, it’s still worth trying them to eliminate a simple problem with a non-working screen:

• Charge your tablet . Often, users forget to charge the device on time and believe that it has stopped working. If the battery charge is critically low, the tablet will not show any signs of life. If you use an Apple Pencil and the sensor does not respond to it, then charge it too.
• Clear the screen. Some dirt covering the display can cause problems with touchscreen response. For cleaning, use a soft, lint-free cloth (microfiber).
• Update your software. You must install the latest version of IOS software.
• Reboot. Perform a hard reset, which does not erase data on your device, but only reboots the system.
• Uninstall the application. If the screen on your iPad is dark and does not turn on when you launch a certain application, then the problem is with it, not with the screen. First try updating the application, if this does not help, then delete it.

The iPad works, but the screen is black, who should I contact?

If the tablet screen does not turn on even after the manipulations described above, it is recommended to contact the Mr.Profi service center in Kyiv. Experienced engineers, before making repairs, will determine the reason why the iPad has a black screen and does not work.

Only after a free diagnosis, our service center technicians will tell you why the tablet stopped working and how much it will cost to repair this problem. Often the problem is caused by mechanical damage to the device, therefore, in order to make repairs, you need to have certain knowledge and tools.

Self-repair and service repairs

What to do if the iPad won't turn on? You can find a lot of advice on the Internet for DIY repairs. We consider this advice to be harmful - disassembling iPads is a complex and painstaking process that requires certain skills . As for repairing electronic parts, you need experience. Otherwise, you will simply ruin your tablet, and the total cost of repairs will increase significantly - let the specialists handle the repairs. You can follow the above steps and check the functionality of some nodes.

Rate this article